SIDE BAND TIP
Seed Placement: The seed is placed in a 3/4” (19mm) row to the side of the fertiliser row, after the carbide wafer under the tip’s wing seals the fertiliser trench and firms up the seedbed.
Fertiliser Placement: Fertiliser is placed in the center 3/4″ (19mm) below the seedbed. The carbide wafer under the wing seals the fertiliser trench before the seed is placed. In less than ideal conditions, mixing between seed and fertiliser may occur.
Packer Recommendation: 3” (76mm) or wider.
Overview: Cast chrome tip with carbide inserts on the nose and the wing for excellent penetration and wear resistance. A carbide wafer on the bottom of the fertiliser trough prevents bottom wear and keeps the fertiliser trench open. A carbide wafer under the wing seals the fertiliser trench and firms the seedbed prior to seed placement. Hard facing is placed on critical wear points to ensure a long-lasting holder, proper seed placement, and virtually no plugging. The streamlined holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
ALL WINGS ON SIDE BAND OPENERS MUST BE POINTING INWARD TO THE CENTER OF THE SEEDING UNIT TO PREVENT PLUGGING WHEN TURNING.
Customer should order half left and half right wing tips.
614-TIP-2711 (left wing)
614-TIP-2712 (right wing)
Side band assemblies that include this tip:
- Bourgault 680-ASY-2711/2712
- C-Shank 610-ASY-2711/2712
- Case IH 684-ASY-2711/2712, 694-ASY-2711/2712
- Morris 680-ASY-2711/2712, 683-ASY-2711/2712, 693-ASY-2711/2712
Drawing for illustration purposes only. All measurements shown are approximate. Results may vary with multiple factors including soil conditions, ground speed, application rates, fan speeds, and more. In less than ideal conditions, mixing between seed and fertiliser may occur. For more information please refer to our precautions and risk factors.