The two part quick change seed boot system consists of the seed boot holder, which bolts on to the back of the shank, and the seed boot attachment, which fits into the holder and is secured with a bolt and nut.

Match seed spread to opener width with seven interchangeable attachments, each with a unique seed spread pattern.

For producers who want to switch back and forth from a wide seed spread behind a sweep, to a narrow seed band behind a knife, this quick change system can be a great fit.

NOTE:

• All holders on this page only accept 1-1/8” (29 mm) O.D. hose.
• Bushing 300-BSH-1200 is required for 1-1/4” (32 mm) OD hose.
• A 3/8″ (9mm) screw 911-SCR-1038 is also available to secure the air hose into the top of the bushing.
• A self-tapping screw 911-SCR-1051should be used to hold the air hose or the bushing into the seed boot holder.