skip to Main Content

SPEED-LOC™ OPENERS, SWEEPS & SPIKES

Quickly change between BTT seed openers, fertiliser knives, sweeps and spikes.

Speed-Loc™ adapters allow BTT products to fit on a variety of machines.

icon_speedloc adapter

NOT SURE WHAT SPEED-LOC™ ADAPTER FITS YOUR MACHINE?

Find your equipment and the adapter that’s required on theSpeed-Loc™ Adapter Chart.

icon_assembly instructions

ASSEMBLY, INSTALLATION & REMOVAL QUESTIONS?

See theSpeed-Loc™ Guide or videos for expert advice on the quick change system.

icon_speed-loc_release tool

REMOVING PRODUCTS FROM THE SPEED-LOC™ ADAPTERS?

Remember to use the Speed-Loc™ Release Tool to remove openers, sweeps and spikes from the adapters.

icon_accessories

NEED REPLACEMENT PARTS OR A SPEED-LOC™ DRIVER?

Find the right Speed-Loc™ Accessories to install, remove and maintain the quick change system.

SPEED-LOC™ SEED OPENERS

200-HOE-1700

200-HOE-1700

Fits: 200 Series Speed-Loc™

Fertiliser Type: N/A

Overview: This single shoot opener runs through the ground at a fairly vertical angle to provide less rock pulling. Provides 1-1/2″ to 1-3/4″ (38 – 44mm) seed spread. Works best with a 1″ (25mm) single tube seed boot.

Welded high-chrome tip included.

READ MORE

200-KNF-0811

200-KNF-0810 / 0811

Fits: 200 Series Speed-Loc™

Fertiliser Type: N/A

Overview: This low disturbance single shoot opener is low in draft and easy pulling. It is designed to work with 300-ATM-1035 of the Seed Boot System.

Welded tip with or without carbide included.

READ MORE

200-KNF-0813

200-KNF-0813

Fits: 200 Series Speed-Loc™

Fertiliser Type: N/A

Overview: The more vertical approach of this single shoot opener reduces rock pulling. It is designed to work with 300-ATM-1035 of the Seed Boot System.

Welded carbide tip included.

READ MORE

200-KNF-7501

200-KNF-7501

Fits: 200 Series Speed-Loc™

Fertiliser Type: N/A

Overview: This single shoot opener is used in conjunction with Technotill system.

Welded high-chrome tip included.

READ MORE

200-KNF-7511

200-KNF-7510 / 7511

Fits: 200 Series Speed-Loc™

Fertiliser Type: Liquid Phos

Overview: Precise seed placement due to the funnel being close to the tip and to the bottom of the furrow. The funnel is reinforced with hard surfacing for longer wear life. The funnel fits Bourgault and Flexi-Coil square tube seed boots. Also works with the square tube seed boot. This single shoot opener is also available with a phosphorus tube add-on (200-ASY-7511P).

Welded tip with or without carbide included.

READ MORE

200-KNF-7542

200-KNF-7542

Fits: 200 Series Speed-Loc™

Fertiliser Type: Granular

Overview: This single shoot opener is perfect for heavy gumbo soils. The extra space between the tip and the tube reduces plugging.

Welded high-chrome tip included.

READ MORE

200-KNH-4000

200-KNH-4000

Fits: 200 Series Speed-Loc™

Fertiliser Type: N/A

Overview: This single shoot opener is designed to work with 300-ATM-1035 of the Seed Boot System.

Your choice of any single shoot replaceable tips. Sold separately.

READ MORE

200-KNH-4010

200-KNH-4010

Fits: 200 Series Speed-Loc™

Fertiliser Type: N/A

Overview: This funnel is reinforced with hard surfacing for longer wear life. This single shoot opener works with the square tube seed boot of the Seed Boot System. Also fits the Bourgault or Flexi-Coil square tube seed boot.

Your choice of any single shoot replaceable tips. Sold separately.

READ MORE

200-VRT-1040

200-VRT-1040

Fits: 200 Series Speed-Loc™

Fertiliser Type: Granular

Overview: The vertical approach of this single shoot opener reduces rock pulling and soil throw.

Welded carbide tip included.

READ MORE

200-SPN-0208_BA

200-SPN-0200 / 0208

Fits: 200 Series Speed-Loc™

Fertiliser Type: N/A

Overview: These spoons have a 2″ (51mm) spread. Available in 1/4″ (6mm) material or 5/16″ (8mm) material for increased wear life.

READ MORE

200-SPN-0300 / 0308

Fits: 200 Series Speed-Loc™

Fertiliser Type: N/A

Overview: These spoons have a 3″ (76mm) spread. Available in 1/4″ (6mm) material or 5/16″ (8mm) material for increased wear life.

READ MORE

200-VRT-1040

200-VRT-1000

Fits: 200 Series Speed-Loc™

Fertiliser Type: N/A

Overview: The vertical approach of this single shoot opener reduces rock pulling. It is designed to work with the 300-ATM-1031 of the Seed Boot System.

Welded carbide tip included.

READ MORE

410-KNF-0800

410-KNF-0800 / 0801

Fits: 410 Series Speed-Loc™

Fertiliser Type: N/A

Overview: Low disturbance, low draft single shoot opener provides easy pulling. It is designed to work with the 300-ATM-1031 of the Seed Boot System.

Welded tip with or without carbide included.

READ MORE

410-SPN-0308

410-SPN-0300 / 0308

Fits: 410 Series Speed-Loc™

Fertiliser Type: N/A

Overview: These spoons have a 3” (76 mm) spread. Available in 1/4” (6 mm) material(410-SPN-0300) or 5/16” (8 mm) material (410-SPN-0308) for increased wear life.

Welded tip with or without carbide included.

READ MORE

SPEED-LOC™ FERTILISER KNIVES

200-ASY-7523-2019

200-ASY-7523

Fits: 200 Series Speed-Loc™

Fertiliser Type: Non-Freeze NH3

Overview: NH3 is delivered through an engineered nylon insert. This prevents the moist soil from freezing up and building up on the knife keeping it narrow to reduce the disturbance with minimal gassing off.

Welded carbide tip included.

READ MORE

600-KNH-7520

200-KNF-7520 / 7521

Fits: 200 Series Speed-Loc™

Fertiliser Type: Cold Flow NH3

Overview: The shorter tube length on this knife makes it better for cultivators and chisel plows. The welded tip is better for rocky conditions.

Welded tip with or without carbide included.

READ MORE

200-KNF-7525

200-KNF-7524 / 7525

Fits: 200 Series Speed-Loc™

Fertiliser Type: Cold Flow NH3

Overview: The longer tube makes this opener better for air seeders and air drills. The welded tip is better for rocky conditions.

Welded tip with or without carbide included.

READ MORE

200-KNF-7531

200-KNF-7530 / 7531

Fits: 200 Series Speed-Loc™

Fertiliser Type: Hot Gas NH3

Overview: The shorter tube length makes this opener better for use on cultivators and chisel plows. The welded tip is better for rocky conditions.

Welded tip with or without carbide included.

READ MORE

200-KNF-7551

200-KNF-7551 / 7553

Fits: 200 Series Speed-Loc™

Fertiliser Type: Granular + NH3

Overview: Designed for use with granular fertiliser and cold-flow NH3 kits (200-KNF-7551) or hot-gas kits (200-KNF-7553). Also available to fit 410 Series Speed-Loc™.

Welded carbide tip included. 

READ MORE

200-KNF-7560

200-KNF-7560

Fits: 200 Series Speed-Loc™

Fertiliser Type: NH3 + Liquid Phosphorus

Overview: Designed for use with Aqua NH3 & Liquid Phos. Also available to fit 410 Series Speed-Loc™. The welded tip is better for rocky conditions.

Welded carbide tip included.

READ MORE

200-KNH-4020

200-KNH-4020

Fits: 200 Series Speed-Loc™

Fertiliser Type: Cold Flow NH3

Overview: The knife is only recommended on light duty units with light trips. Not recommended in rocky areas.

Your choice of any single shoot replaceable tips. Sold separately.

READ MORE

410-ASY-0823

410-ASY-0823

Fits: 410 Series Speed-Loc™

Fertiliser Type: Non-Freeze NH3

Overview: NH3 is delivered through an engineered nylon insert. This prevents the moist soil from freezing up and building up on the knife keeping it narrow to reduce the disturbance with minimal gassing off.

Welded carbide tip included.

READ MORE

410-ASY-7523

410-ASY-7523

Fits: 410 Series Speed-Loc™

Fertiliser Type: Non-Freeze NH3

Overview: NH3 is delivered through an engineered nylon insert. This prevents the moist soil from freezing up and building up on the knife keeping it narrow to reduce the disturbance with minimal gassing off.

Your choice of 3/4″ or 3″ carbide tips. Sold separately.

READ MORE

410-KNF-0825

410-KNF-0824 / 0825

Fits: 410 Series Speed-Loc™

Fertiliser Type: Cold Flow NH3

Overview: This opener is designed for heavy-duty use. The welded tip is better for rocky conditions.

Welded 3/4″ tip with or without carbide included.

READ MORE

410-KNF-0826

410-KNF-0826

Fits: 410 Series Speed-Loc™

Fertiliser Type: Liquid N NH3 PSI

Overview: Designed for use with liquid fertiliser or NH3. This opener is designed for heavy-duty use.

Welded 3/4″ tip with or without carbide included.

READ MORE

410-KNF-0825

410-KNF-0830 / 0831

Fits: 410 Series Speed-Loc™

Fertiliser Type: Hot Gas NH3

Overview: This opener is designed for heavy-duty use. The welded tip is better for rocky conditions.

Welded 3/4″ tip with or without carbide included.

READ MORE

410-KNF-7540

410-KNF-7540

Fits: 410 Series Speed-Loc™

Fertiliser Type: Granular

Overview: Works well in rocky conditions and fits 1-1/4″ (32 mm) tubes.

Welded 3/4″ carbide tip included.

READ MORE

410-KNF-7551

410-KNF-7551 / 7553

Fits: 410 Series Speed-Loc™

Fertiliser Type: Granular + Cold Flow or Hot Gas NH3

Overview: Designed for use with granular fertiliser and cold-flow NH3 kits (410-KNF-7551) or hot-gas kits (410-KNF-7553). Also available to fit 200 Series Speed-Loc™.

Welded 3/4″ carbide tip included.

READ MORE

410-KNF-7560

410-KNF-7560

Fits: 410 Series Speed-Loc™

Fertiliser Type: NH3 & Liquid Phos

Overview: Also available to fit 200 Series Speed-Loc™. The welded tip is better for rocky conditions.

Welded 3/4″ carbide tip included.

READ MORE

410-KNH-7524

410-KNH-7524 / 7526

Fits: 410 Series Speed-Loc™

Fertiliser Type: Cold Flow NH3 or NH3 PSI

Overview: Designed for use with NH3. 410-KNF-7524 has 1/2″ tubes, 410-KNF-7526 has 1/4″ tubes.

Your choice of 3/4″ or 3″ carbide tips. Sold separately.

READ MORE

410-KNH-7540

410-KNH-7540

Fits: 410 Series Speed-Loc™

Fertiliser Type: Granular

Overview: Designed for use with granular fertiliser.

Your choice of 3/4″ or 3″ carbide tips. Sold separately.

READ MORE

410-KNH-7551

410-KNH-7551

Fits: 410 Series Speed-Loc™

Fertiliser Type: Granular + Cold Flow NH3

Overview: Designed for use with granular fertiliser and Cold Flow NH3 kits. Not recommended for seeding.

Your choice of 3/4″ or 3″ carbide tips. Sold separately.

READ MORE

SPEED-LOC™ SWEEPS & SPIKES

200-Sweeps_BA

200 SERIES SWEEPS

Our cultivator sweeps boast long-lasting designs, precise heat treatments, consistent quality, and innovative Speed-Loc™ technology.

READ MORE

200-GFO-0308BA

200-GFO-0308

This “Goosefoot” tillage tool is 5/16” (8mm) thick and 2-1/2” (63mm) wide. It is designed specifically for vibrating S-tine cultivators.

READ MORE

cultivator sweep 200-PWV-0405

200-PWV-0405

This cultivator sweep is designed mainly for primary tillage or banding fertiliser. It has a hardened wear pad which increases the life expectancy. The nose runs 1/2″ (12mm) lower than the other 200 Series sweeps. This increased pitch improves penetration in hard or compacted ground.

READ MORE

max life cultivator sweep 200-PWV-0405ML

200-PWV-0405ML

Heat applied, embedded carbide has been added to the underside of this cultivator sweep. The sweep is 1/4” (6mm) thick and 4” (100mm) wide. It is designed mainly for primary tillage or banding fertiliser. The nose on this cultivator sweep runs 1/2” (12mm) lower than the other 200 Series sweeps. This increased pitch improves penetration in hard or compacted ground.

READ MORE

cultivator sweep 200-PWV-0428

200-PWV-0428

This cultivator sweep is designed mainly for fall tillage or deep working. The sweep is 5/16″ (8mm) thick, 4″ (100mm) wide, with a 3/8″ x 2″ hardened wear pad which increases its life expectancy.

cultivator sweep 200-PWV-0528

200-PWV-0528

This cultivator sweep is designed mainly for fall tillage or deep working. The sweep is 5/16″ (8mm) thick, 5″ (127mm) wide, with a 3/8″ x 2″ hardened wear pad which increases its life expectancy.

CULTIVATOR SWEEP 200-pwv-0738

200-PWV-0738

This cultivator sweep is 5/16″ (8mm) thick, 7″ (178mm) wide, with a 4″ wide extended wear pad.

READ MORE

max life cultivator sweep 200-PWV-0405ML

200-PWV-0928

This cultivator sweep is 5/16″ (8mm) thick, 9″ (230mm) wide, with a 3/8″ x 2″ hardened wear pad that extends up the entire stem.

READ MORE

quick change spike 200-SPK-0200

200-SPK-0200

This quick change spike is 5/8″ (57mm), 2-1/4″ (57mm) wide, and 6″ (150mm) long. It has a hardened wear pad for extra life. This tool is ideal for primary tillage or banding fertiliser.

max life spike 200-SPK-0200ML

200-SPK-0200ML

Heat applied, embedded carbide has been added to the nose of this quick change spike. This spike is 5/8″ (57mm) x 2-1/4″ (57mm) wide x 6″ (150mm) long. It has a hardened wear pad for extra life. This tool is ideal for primary tillage or banding fertiliser.

quick change spike 200-SPK-0215

200-SPK-0215

This quick change spike is 5/8″ (15mm) thick, 2-1/4″ (57mm) wide, and 6″ (150mm) long. It has a hardened wear pad that extends to the top of the stem to prevent wear in abrasive soil or when working at greater depths.

quick change spike 200-SPK-0230

200-SPK-0230

This quick change spike is 5/8″ (15mm) thick, 2″ (50mm) wide, and 4″ (102mm) long. It has a hardened wear pad for extra life. This tool is made specifically for slurry injection.

READ MORE

410-Sweeps_BA

410 SERIES SWEEPS

Our cultivator sweeps boast long-lasting designs, precise heat treatments, consistent quality, and innovative Speed-Loc™ technology.

READ MORE

410-PWV-0418ML

410-PWV-0418

These cultivator sweeps have a 3/8″ x 2″ hardened wear pad for longer life. It runs at a 13° pitch, which is steeper than the regular 410 sweeps, this results in more disturbance.

READ MORE

410-PWV-0418ML

410-PWV-0418ML

Heat applied, embedded carbide has been added to the underside of this cultivator sweep. The sweep has a 3/8” x 2″ hardened wear pad (52-56 HRC) for longer life. This cultivator sweep runs at a 13° pitch, which is steeper than the regular 410 sweeps.

READ MORE

cultivator swewp 410-PWV-0518

410-PWV-0518

This cultivator sweep has a 3/8″ x 2″ hardened wear pad for longer life. It runs at a 3° pitch, the same as a standard sweep.

410-Sweeps_BA

410 SERIES SWEEPS

Our cultivator sweeps boast long-lasting designs, precise heat treatments, consistent quality, and innovative Speed-Loc™ technology.

READ MORE

410-PWV-0418ML

410-PWV-0418

These cultivator sweeps have a 3/8″ x 2″ hardened wear pad for longer life. It runs at a 13° pitch, which is steeper than the regular 410 sweeps, this results in more disturbance.

READ MORE

410-PWV-0418ML

410-PWV-0418ML

Heat applied, embedded carbide has been added to the underside of this cultivator sweep. The sweep has a 3/8” x 2″ hardened wear pad (52-56 HRC) for longer life. This cultivator sweep runs at a 13° pitch, which is steeper than the regular 410 sweeps.

READ MORE

cultivator swewp 410-PWV-0518

410-PWV-0518

This cultivator sweep has a 3/8″ x 2″ hardened wear pad for longer life. It runs at a 3° pitch, the same as a standard sweep.

410-spk-0200-ML

410-SPK-0200

This heavy-duty spike has a 3/8″ x 2″ hardened wear pad (52-56 HRC) for longer life. It works well for primary tillage or banding fertiliser.

410-spk-0200-ML

410-SPK-0200ML

Heat applied, embedded carbide has been added to the underside of this quick-change spike. The spike is 2” (50mm) wide, 5/8” (15mm) thick and 9” (230mm) long. It has a hardened wear pad (52-56 HRC) for extra life. This spike is ideal for primary tillage or banding fertiliser.

Back To Top