SPEED-LOC™ ACCESSORIES & REPLACEMENT PARTS
NOT SURE WHAT SPEED-LOC™ ADAPTER FITS YOUR MACHINE?
Find your equipment and the adapter that’s required on the Speed-Loc™ Adapter Chart.
ASSEMBLY, INSTALLATION & REMOVAL QUESTIONS?
See the Speed-Loc™ Guide or videos for expert advice on the quick change system.
REMOVING PRODUCTS FROM THE SPEED-LOC™ ADAPTERS?
Remember to use the Speed-Loc™ Release Tool to remove seed openers, fertiliser knives, cultivator sweeps and spikes from the adapters.
INSTALLING PRODUCTS AND NEED A SPEED-LOC™ DRIVER?
Find the right Speed-Loc™ Driver to install your quick change products.
This 4lb (1.8kg) hammer is ideal for installing all quick change products.
This sub-plate is used in conjunction with the 200-QCA-4710 adapter on an S-tine. The Speed-Loc™ system can now be used on S-tines with a single hole.
The speed-release tool must be used to remove 200 and 410 Series sweeps and openers off the Speed-Loc™ adapters.
Replacement bushing for all 200 Series adapters. Comes complete with dust seal.
Replacement dust seal for all 200 and 410 Series Speed-Loc™ adapters.
Replacement locking pin for all 200 and 410 Series adapters purchased after Nov 1, 2008.
Replacement spring ball for the 200-QCA-4700 adapters.
Replacement spring ball for the 200-QCA-4710, 200-QCA-5000 and 200-QCA-5010 adapters.
Replacement spring ball for the 200-QCA-5020 adapter.
Replacement spring ball for 200-QCA-5020 adapter for special applications.
Replacement spring ball for 200-QCA-5030 adapters.
Replacement bushing for the 410-QCA-5000, 410-QCA-5010 and 410-QCA-5020. Comes complete with dust seal.
Replacement locking pin for all 410 Series adapters purchased prior to Nov 1/08. Use 200-SLC-1020 if 410 Series adapter was purchased after Nov 1/08.
Replacement spring ball for the 410-QCA-5000, 410-QCA-5010 and 410-QCA-5020.
Complete replacement package for the 410 Series, includes bushing, spring ball, pin and dust seal.
SPEED-LOC™ DRIVERS
Use for installing:
- 200-ASY-7523
- 200-KNF-0863
- 200-KNF-7501
- 200-KNF-7510
- 200-KNF-7511 / 7511P
- 200-KNF-7512
- 200-KNF-7520
- 200-KNF-7521
- 200-KNF-7524
- 200-KNF-7525
- 200-KNF-7530
- 200-KNF-7531
- 200-KNF-7542
- 200-KNF-7551
- 200-KNF-7553
Use for installing:
- 200-HOE-1700
Use for installing these tips:
- 200-TIP-2011
- 200-TIP-3000
- 200-TIP-3001
- 200-TIP-3011
- 200-TIP-4011
onto these openers:
- 200-KNH-4000
- 200-KNH-4010
- 200-KNH-4020
Use for installing:
- 200-TIP-1011
- 200-VRT-1000
- 200-VRT-1040
- 400-VRT-1000
Use for installing sweeps and spoons.
Use for installing:
- 200-KNF-0800
- 200-KNF-0801
- 200-KNF-0810
- 200-KNF-0811
- 200-KNF-0813
- 200-KNF-7560
- 200-KNH-7551
- 200-TIP 0511, 0801, 0802, 0803, 0811 when used on 200-KNH-4000, 4010 OR 4020
- 410-ASY-0823
- 410-ASY-7523
- 410-HLD-7500
- 410-KNF-0800
- 410-KNF-0801
- 410-KNF-0824
- 410-KNF-0825
- 410-KNF-0826
- 410-KNF-0830
- 410-KNF-0831
- 410-KNF-7540
- 410-KNF-7551
- 410-KNF-7553
- 410-KNF-7560
- 410-KNH-7524
- 410-KNH-7526
- 410-KNH-7540
- 410-KNH-7551