SPEED-LOC™ OPENERS, SWEEPS & SPIKES
Quickly change between BTT seed openers, fertiliser knives, sweeps and spikes.
Speed-Loc™ adapters allow BTT products to fit on a variety of machines.
NOT SURE WHAT SPEED-LOC™ ADAPTER FITS YOUR MACHINE?
Find your equipment and the adapter that’s required on theSpeed-Loc™ Adapter Chart.
ASSEMBLY, INSTALLATION & REMOVAL QUESTIONS?
See theSpeed-Loc™ Guide or videos for expert advice on the quick change system.
REMOVING PRODUCTS FROM THE SPEED-LOC™ ADAPTERS?
Remember to use the Speed-Loc™ Release Tool to remove openers, sweeps and spikes from the adapters.
NEED REPLACEMENT PARTS OR A SPEED-LOC™ DRIVER?
Find the right Speed-Loc™ Accessories to install, remove and maintain the quick change system.
SPEED-LOC™ SEED OPENERS
200-HOE-1700
Fits: 200 Series Speed-Loc™
Fertiliser Type: N/A
Overview: This single shoot opener runs through the ground at a fairly vertical angle to provide less rock pulling. Provides 1-1/2″ to 1-3/4″ (38 – 44mm) seed spread. Works best with a 1″ (25mm) single tube seed boot.
Welded high-chrome tip included.
200-KNF-0810 / 0811
Fits: 200 Series Speed-Loc™
Fertiliser Type: N/A
Overview: This low disturbance single shoot opener is low in draft and easy pulling. It is designed to work with 300-ATM-1035 of the Seed Boot System.
Welded tip with or without carbide included.
200-KNF-0813
Fits: 200 Series Speed-Loc™
Fertiliser Type: N/A
Overview: The more vertical approach of this single shoot opener reduces rock pulling. It is designed to work with 300-ATM-1035 of the Seed Boot System.
Welded carbide tip included.
200-KNF-7501
Fits: 200 Series Speed-Loc™
Fertiliser Type: N/A
Overview: This single shoot opener is used in conjunction with Technotill system.
Welded high-chrome tip included.
200-KNF-7510 / 7511
Fits: 200 Series Speed-Loc™
Fertiliser Type: Liquid Phos
Overview: Precise seed placement due to the funnel being close to the tip and to the bottom of the furrow. The funnel is reinforced with hard surfacing for longer wear life. The funnel fits Bourgault and Flexi-Coil square tube seed boots. Also works with the square tube seed boot. This single shoot opener is also available with a phosphorus tube add-on (200-ASY-7511P).
Welded tip with or without carbide included.
200-KNF-7542
Fits: 200 Series Speed-Loc™
Fertiliser Type: Granular
Overview: This single shoot opener is perfect for heavy gumbo soils. The extra space between the tip and the tube reduces plugging.
Welded high-chrome tip included.
200-KNH-4000
Fits: 200 Series Speed-Loc™
Fertiliser Type: N/A
Overview: This single shoot opener is designed to work with 300-ATM-1035 of the Seed Boot System.
Your choice of any single shoot replaceable tips. Sold separately.
200-KNH-4010
Fits: 200 Series Speed-Loc™
Fertiliser Type: N/A
Overview: This funnel is reinforced with hard surfacing for longer wear life. This single shoot opener works with the square tube seed boot of the Seed Boot System. Also fits the Bourgault or Flexi-Coil square tube seed boot.
Your choice of any single shoot replaceable tips. Sold separately.
200-VRT-1040
Fits: 200 Series Speed-Loc™
Fertiliser Type: Granular
Overview: The vertical approach of this single shoot opener reduces rock pulling and soil throw.
Welded carbide tip included.
200-SPN-0200 / 0208
Fits: 200 Series Speed-Loc™
Fertiliser Type: N/A
Overview: These spoons have a 2″ (51mm) spread. Available in 1/4″ (6mm) material or 5/16″ (8mm) material for increased wear life.
200-SPN-0300 / 0308
Fits: 200 Series Speed-Loc™
Fertiliser Type: N/A
Overview: These spoons have a 3″ (76mm) spread. Available in 1/4″ (6mm) material or 5/16″ (8mm) material for increased wear life.
200-VRT-1000
Fits: 200 Series Speed-Loc™
Fertiliser Type: N/A
Overview: The vertical approach of this single shoot opener reduces rock pulling. It is designed to work with the 300-ATM-1031 of the Seed Boot System.
Welded carbide tip included.
410-KNF-0800 / 0801
Fits: 410 Series Speed-Loc™
Fertiliser Type: N/A
Overview: Low disturbance, low draft single shoot opener provides easy pulling. It is designed to work with the 300-ATM-1031 of the Seed Boot System.
Welded tip with or without carbide included.
410-SPN-0300 / 0308
Fits: 410 Series Speed-Loc™
Fertiliser Type: N/A
Overview: These spoons have a 3” (76 mm) spread. Available in 1/4” (6 mm) material(410-SPN-0300) or 5/16” (8 mm) material (410-SPN-0308) for increased wear life.
Welded tip with or without carbide included.
SPEED-LOC™ FERTILISER KNIVES
200-ASY-7523
Fits: 200 Series Speed-Loc™
Fertiliser Type: Non-Freeze NH3
Overview: NH3 is delivered through an engineered nylon insert. This prevents the moist soil from freezing up and building up on the knife keeping it narrow to reduce the disturbance with minimal gassing off.
Welded carbide tip included.
200-KNF-7520 / 7521
Fits: 200 Series Speed-Loc™
Fertiliser Type: Cold Flow NH3
Overview: The shorter tube length on this knife makes it better for cultivators and chisel plows. The welded tip is better for rocky conditions.
Welded tip with or without carbide included.
200-KNF-7524 / 7525
Fits: 200 Series Speed-Loc™
Fertiliser Type: Cold Flow NH3
Overview: The longer tube makes this opener better for air seeders and air drills. The welded tip is better for rocky conditions.
Welded tip with or without carbide included.
200-KNF-7530 / 7531
Fits: 200 Series Speed-Loc™
Fertiliser Type: Hot Gas NH3
Overview: The shorter tube length makes this opener better for use on cultivators and chisel plows. The welded tip is better for rocky conditions.
Welded tip with or without carbide included.
200-KNF-7551 / 7553
Fits: 200 Series Speed-Loc™
Fertiliser Type: Granular + NH3
Overview: Designed for use with granular fertiliser and cold-flow NH3 kits (200-KNF-7551) or hot-gas kits (200-KNF-7553). Also available to fit 410 Series Speed-Loc™.
Welded carbide tip included.
200-KNF-7560
Fits: 200 Series Speed-Loc™
Fertiliser Type: NH3 + Liquid Phosphorus
Overview: Designed for use with Aqua NH3 & Liquid Phos. Also available to fit 410 Series Speed-Loc™. The welded tip is better for rocky conditions.
Welded carbide tip included.
200-KNH-4020
Fits: 200 Series Speed-Loc™
Fertiliser Type: Cold Flow NH3
Overview: The knife is only recommended on light duty units with light trips. Not recommended in rocky areas.
Your choice of any single shoot replaceable tips. Sold separately.
410-ASY-0823
Fits: 410 Series Speed-Loc™
Fertiliser Type: Non-Freeze NH3
Overview: NH3 is delivered through an engineered nylon insert. This prevents the moist soil from freezing up and building up on the knife keeping it narrow to reduce the disturbance with minimal gassing off.
Welded carbide tip included.
410-ASY-7523
Fits: 410 Series Speed-Loc™
Fertiliser Type: Non-Freeze NH3
Overview: NH3 is delivered through an engineered nylon insert. This prevents the moist soil from freezing up and building up on the knife keeping it narrow to reduce the disturbance with minimal gassing off.
Your choice of 3/4″ or 3″ carbide tips. Sold separately.
410-KNF-0824 / 0825
Fits: 410 Series Speed-Loc™
Fertiliser Type: Cold Flow NH3
Overview: This opener is designed for heavy-duty use. The welded tip is better for rocky conditions.
Welded 3/4″ tip with or without carbide included.
410-KNF-0826
Fits: 410 Series Speed-Loc™
Fertiliser Type: Liquid N NH3 PSI
Overview: Designed for use with liquid fertiliser or NH3. This opener is designed for heavy-duty use.
Welded 3/4″ tip with or without carbide included.
410-KNF-0830 / 0831
Fits: 410 Series Speed-Loc™
Fertiliser Type: Hot Gas NH3
Overview: This opener is designed for heavy-duty use. The welded tip is better for rocky conditions.
Welded 3/4″ tip with or without carbide included.
410-KNF-7540
Fits: 410 Series Speed-Loc™
Fertiliser Type: Granular
Overview: Works well in rocky conditions and fits 1-1/4″ (32 mm) tubes.
Welded 3/4″ carbide tip included.
410-KNF-7551 / 7553
Fits: 410 Series Speed-Loc™
Fertiliser Type: Granular + Cold Flow or Hot Gas NH3
Overview: Designed for use with granular fertiliser and cold-flow NH3 kits (410-KNF-7551) or hot-gas kits (410-KNF-7553). Also available to fit 200 Series Speed-Loc™.
Welded 3/4″ carbide tip included.
410-KNF-7560
Fits: 410 Series Speed-Loc™
Fertiliser Type: NH3 & Liquid Phos
Overview: Also available to fit 200 Series Speed-Loc™. The welded tip is better for rocky conditions.
Welded 3/4″ carbide tip included.
410-KNH-7524 / 7526
Fits: 410 Series Speed-Loc™
Fertiliser Type: Cold Flow NH3 or NH3 PSI
Overview: Designed for use with NH3. 410-KNF-7524 has 1/2″ tubes, 410-KNF-7526 has 1/4″ tubes.
Your choice of 3/4″ or 3″ carbide tips. Sold separately.
410-KNH-7540
Fits: 410 Series Speed-Loc™
Fertiliser Type: Granular
Overview: Designed for use with granular fertiliser.
Your choice of 3/4″ or 3″ carbide tips. Sold separately.
410-KNH-7551
Fits: 410 Series Speed-Loc™
Fertiliser Type: Granular + Cold Flow NH3
Overview: Designed for use with granular fertiliser and Cold Flow NH3 kits. Not recommended for seeding.
Your choice of 3/4″ or 3″ carbide tips. Sold separately.
SPEED-LOC™ SWEEPS & SPIKES
200 SERIES SWEEPS
Our cultivator sweeps boast long-lasting designs, precise heat treatments, consistent quality, and innovative Speed-Loc™ technology.
200-GFO-0308
This “Goosefoot” tillage tool is 5/16” (8mm) thick and 2-1/2” (63mm) wide. It is designed specifically for vibrating S-tine cultivators.
200-PWV-0405
This cultivator sweep is designed mainly for primary tillage or banding fertiliser. It has a hardened wear pad which increases the life expectancy. The nose runs 1/2″ (12mm) lower than the other 200 Series sweeps. This increased pitch improves penetration in hard or compacted ground.
200-PWV-0405ML
Heat applied, embedded carbide has been added to the underside of this cultivator sweep. The sweep is 1/4” (6mm) thick and 4” (100mm) wide. It is designed mainly for primary tillage or banding fertiliser. The nose on this cultivator sweep runs 1/2” (12mm) lower than the other 200 Series sweeps. This increased pitch improves penetration in hard or compacted ground.
200-PWV-0428
This cultivator sweep is designed mainly for fall tillage or deep working. The sweep is 5/16″ (8mm) thick, 4″ (100mm) wide, with a 3/8″ x 2″ hardened wear pad which increases its life expectancy.
200-PWV-0528
This cultivator sweep is designed mainly for fall tillage or deep working. The sweep is 5/16″ (8mm) thick, 5″ (127mm) wide, with a 3/8″ x 2″ hardened wear pad which increases its life expectancy.
200-PWV-0738
This cultivator sweep is 5/16″ (8mm) thick, 7″ (178mm) wide, with a 4″ wide extended wear pad.
200-PWV-0928
This cultivator sweep is 5/16″ (8mm) thick, 9″ (230mm) wide, with a 3/8″ x 2″ hardened wear pad that extends up the entire stem.
200-SPK-0200
This quick change spike is 5/8″ (57mm), 2-1/4″ (57mm) wide, and 6″ (150mm) long. It has a hardened wear pad for extra life. This tool is ideal for primary tillage or banding fertiliser.
200-SPK-0200ML
Heat applied, embedded carbide has been added to the nose of this quick change spike. This spike is 5/8″ (57mm) x 2-1/4″ (57mm) wide x 6″ (150mm) long. It has a hardened wear pad for extra life. This tool is ideal for primary tillage or banding fertiliser.
200-SPK-0215
This quick change spike is 5/8″ (15mm) thick, 2-1/4″ (57mm) wide, and 6″ (150mm) long. It has a hardened wear pad that extends to the top of the stem to prevent wear in abrasive soil or when working at greater depths.
200-SPK-0230
This quick change spike is 5/8″ (15mm) thick, 2″ (50mm) wide, and 4″ (102mm) long. It has a hardened wear pad for extra life. This tool is made specifically for slurry injection.
410 SERIES SWEEPS
Our cultivator sweeps boast long-lasting designs, precise heat treatments, consistent quality, and innovative Speed-Loc™ technology.
410-PWV-0418
These cultivator sweeps have a 3/8″ x 2″ hardened wear pad for longer life. It runs at a 13° pitch, which is steeper than the regular 410 sweeps, this results in more disturbance.
410-PWV-0418ML
Heat applied, embedded carbide has been added to the underside of this cultivator sweep. The sweep has a 3/8” x 2″ hardened wear pad (52-56 HRC) for longer life. This cultivator sweep runs at a 13° pitch, which is steeper than the regular 410 sweeps.
410-PWV-0518
This cultivator sweep has a 3/8″ x 2″ hardened wear pad for longer life. It runs at a 3° pitch, the same as a standard sweep.
410 SERIES SWEEPS
Our cultivator sweeps boast long-lasting designs, precise heat treatments, consistent quality, and innovative Speed-Loc™ technology.
410-PWV-0418
These cultivator sweeps have a 3/8″ x 2″ hardened wear pad for longer life. It runs at a 13° pitch, which is steeper than the regular 410 sweeps, this results in more disturbance.
410-PWV-0418ML
Heat applied, embedded carbide has been added to the underside of this cultivator sweep. The sweep has a 3/8” x 2″ hardened wear pad (52-56 HRC) for longer life. This cultivator sweep runs at a 13° pitch, which is steeper than the regular 410 sweeps.
410-PWV-0518
This cultivator sweep has a 3/8″ x 2″ hardened wear pad for longer life. It runs at a 3° pitch, the same as a standard sweep.
410-SPK-0200
This heavy-duty spike has a 3/8″ x 2″ hardened wear pad (52-56 HRC) for longer life. It works well for primary tillage or banding fertiliser.
410-SPK-0200ML
Heat applied, embedded carbide has been added to the underside of this quick-change spike. The spike is 2” (50mm) wide, 5/8” (15mm) thick and 9” (230mm) long. It has a hardened wear pad (52-56 HRC) for extra life. This spike is ideal for primary tillage or banding fertiliser.