200 SERIES SWEEPS
What’s in a sweep? Most cultivator sweeps on the market today are made with very comparable material. If the material used doesn’t set the sweep apart, then what makes the difference in the life and quality of a cultivator sweep?
• Precise Heat Treatment • Long-Lasting Design • Consistent Quality • Innovative Speed-Loc™ Technology
- 4`` (100 mm)
- 5`` (140 mm)
- 7`` (180 mm)
- 9`` (230 mm)
- 10`` (254 mm)
- 11`` (280 mm)
- 12`` (305 mm)
- 13`` (330 mm)
- 14`` (355 mm)
- 16`` (406 mm)
- 18`` (457 mm)
Fits: 200 Series Speed-Loc™
Size: 4″ (100mm)
Thickness: 1/4″ (6mm)
Installation Driver: 400-DRV-1000
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
200-PWV-0500 & 200-PWV-0508
Fits: 200 Series Speed-Loc™
Size: 5″ (140mm)
Thickness: Available in two thicknesses.
- 1/4″ (6mm) 200-PWV-0500
- 5/16″ (8mm) 200-PWV-0508
Installation Driver: 400-DRV-1000
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
200-PWV-0700 & 200-PWV-0708
Fits: 200 Series Speed-Loc™
Size: 7″ (180mm)
Thickness: Available in two thicknesses.
- 1/4″ (6mm) 200-PWV-0700
- 5/16″ (8mm) 200-PWV-0708
Installation Driver: 400-DRV-1000
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
200-PWV-0900 & 200-PWV-0908
Fits: 200 Series Speed-Loc™
Size: 9″ (230mm)
Thickness: Available in two thicknesses.
- 1/4″ (6mm) 200-PWV-0900
- 5/16″ (8mm) 200-PWV-0908
Installation Driver: 400-DRV-1000
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
200-PWV-1000 & 200-PWV-1008
Fits: 200 Series Speed-Loc™
Size: 10″ (254mm)
Thickness: Available in two thicknesses.
- 1/4″ (6mm) 200-PWV-1000
- 5/16″ (8mm) 200-PWV-1008
Installation Driver: 400-DRV-1000
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
200-PWV-1100 & 200-PWV-1108
Fits: 200 Series Speed-Loc™
Size: 11″ (280mm)
Thickness: Available in two thicknesses.
- 1/4″ (6mm) 200-PWV-1100
- 5/16″ (8mm) 200-PWV-1108
Installation Driver: 400-DRV-1000
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
200-PWV-1200 & 200-PWV-1208
Fits: 200 Series Speed-Loc™
Size: 12″ (305mm)
Thickness: Available in two thicknesses.
- 1/4″ (6mm) 200-PWV-1200
- 5/16″ (8mm) 200-PWV-1208
Installation Driver: 400-DRV-1000
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
200-PWV-1300 & 200-PWV-1308
Fits: 200 Series Speed-Loc™
Size: 13″ (330mm)
Thickness: Available in two thicknesses.
- 1/4″ (6mm) 200-PWV-1300
- 5/16″ (8mm) 200-PWV-1308
Installation Driver: 400-DRV-1000
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
200-PWV-1400 & 200-PWV-1408
Fits: 200 Series Speed-Loc™
Size: 14″ (355mm)
Thickness: Available in two thicknesses.
- 1/4″ (6mm) 200-PWV-1400
- 5/16″ (8mm) 200-PWV-1408
Installation Driver: 400-DRV-1000
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
200-PWV-1608
Fits: 200 Series Speed-Loc™
Size: 16″ (406mm)
Thickness: 5/16″ (8mm)
Installation Driver: 400-DRV-1000
Note: This sweep is only available in 5/16″ (8mm) thickness and was developed for Western Europe. It is not recommended for most North American field conditions and should only be used domestically when there are no rocks present. Available in North America by special order only.
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.
200-PWV-1808
Fits: 200 Series Speed-Loc™
Size: 18″ (457mm)
Thickness: 5/16″ (8mm)
Installation Driver: 400-DRV-1000
NOTE: This sweep is only available in 5/16″ (8mm) thickness and was developed for Western Europe. It is not recommended for most North American field conditions and should only be used domestically when there are no rocks present. Available in North America by special order only.
The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.