BLUE ARMOUR™, SPEED-LOC™ & BOLT-ON TILLAGE TOOLS
Blue Armour™
Several field tests conducted in North America and Europe show that Blue Armour cultivator sweeps have a 24-30% longer wear life with reduced stem wear. It is available in most Bolt-On and Speed-Loc™ Quick Change lines. Look for the Blue Armour shield in the products below.
Speed-Loc™ Series
Speed-Loc™ Adapters fit various machines making it easy to change between BTT seeding openers, fertiliser knives, cultivator sweeps and spikes. The adapter’s upper stop ensures tillage or seeding tools are always running at the same depth, while the spring-loaded locking pin ensures products stay securely in place in all conditions. We back that up with a 100% guarantee.
Bolt-On Series
Bolt-on cultivator sweeps made with precise heat treatments fit any make and model of tillage equipment, have a durable design, and consistent quality.
200 SERIES SPEED-LOC™
Our cultivator sweeps boast long-lasting designs, precise heat treatments, consistent quality, and innovative Speed-Loc™ technology.
This “Goosefoot” tillage tool is 5/16” (8mm) thick and 2-1/2” (63mm) wide. It is designed specifically for vibrating S-tine cultivators.
This cultivator sweep is designed mainly for primary tillage or banding fertiliser. It has a hardened wear pad which increases the life expectancy. The nose runs 1/2″ (12mm) lower than the other 200 Series sweeps. This increased pitch improves penetration in hard or compacted ground.
Heat applied, embedded carbide has been added to the underside of this cultivator sweep. The sweep is 1/4” (6mm) thick and 4” (100mm) wide. It is designed mainly for primary tillage or banding fertiliser. The nose on this cultivator sweep runs 1/2” (12mm) lower than the other 200 Series sweeps. This increased pitch improves penetration in hard or compacted ground.
This cultivator sweep is designed mainly for fall tillage or deep working. The sweep is 5/16″ (8mm) thick, 4″ (100mm) wide, with a 3/8″ x 2″ hardened wear pad which increases its life expectancy.
This cultivator sweep is designed mainly for fall tillage or deep working. The sweep is 5/16″ (8mm) thick, 5″ (127mm) wide, with a 3/8″ x 2″ hardened wear pad which increases its life expectancy.
This cultivator sweep is 5/16″ (8mm) thick, 7″ (178mm) wide, with a 4″ wide extended wear pad.
This cultivator sweep is 5/16″ (8mm) thick, 9″ (230mm) wide, with a 3/8″ x 2″ hardened wear pad that extends up the entire stem.
This quick change spike is 5/8″ (57mm), 2-1/4″ (57mm) wide, and 6″ (150mm) long. It has a hardened wear pad for extra life. This tool is ideal for primary tillage or banding fertiliser.
Heat applied, embedded carbide has been added to the nose of this quick change spike. This spike is 5/8″ (57mm) x 2-1/4″ (57mm) wide x 6″ (150mm) long. It has a hardened wear pad for extra life. This tool is ideal for primary tillage or banding fertiliser.
This quick change spike is 5/8″ (15mm) thick, 2-1/4″ (57mm) wide, and 6″ (150mm) long. It has a hardened wear pad that extends to the top of the stem to prevent wear in abrasive soil or when working at greater depths.
This quick change spike is 5/8″ (15mm) thick, 2″ (50mm) wide, and 4″ (102mm) long. It has a hardened wear pad for extra life. This tool is made specifically for slurry injection.
410 SERIES SPEED-LOC™
Our cultivator sweeps boast long-lasting designs, precise heat treatments, consistent quality, and innovative Speed-Loc™ technology.
These cultivator sweeps have a 3/8″ x 2″ hardened wear pad for longer life. It runs at a 13° pitch, which is steeper than the regular 410 sweeps, this results in more disturbance.
Heat applied, embedded carbide has been added to the underside of this cultivator sweep. The sweep has a 3/8” x 2″ hardened wear pad (52-56 HRC) for longer life. This cultivator sweep runs at a 13° pitch, which is steeper than the regular 410 sweeps.
This cultivator sweep has a 3/8″ x 2″ hardened wear pad for longer life. It runs at a 3° pitch, the same as a standard sweep.
This heavy-duty spike has a 3/8″ x 2″ hardened wear pad (52-56 HRC) for longer life. It works well for primary tillage or banding fertiliser.
Heat applied, embedded carbide has been added to the underside of this quick-change spike. The spike is 2” (50mm) wide, 5/8” (15mm) thick and 9” (230mm) long. It has a hardened wear pad (52-56 HRC) for extra life. This spike is ideal for primary tillage or banding fertiliser.
BOLT-ON SERIES
Our cultivator sweeps boast long-lasting designs, precise heat treatments, consistent quality, designed to fit any make and model of tillage equipment.
This reversible chisel is used for primary tillage in the fall or early spring.
Fits: Any chisel plow shank except Bourgault chisel plow and Morris LH 755 shank
Shorter than our other two reversible spikes, it is designed for light to medium-duty field cultivators or for chisel plows where ground clearance in transport is a concern.
Fits: Bourgault chisel plow and Morris LH 755 shank
Flat through the bolt hole section, this reversible spike is designed specifically to fit the Bourgault chisel plow as well as the Morris LH 755 shank.
This spike is curved at the bolt hole section, it can be used on any chisel plow shank except the Bourgault and Morris LH 755 shank.
This reversible chisel has heat applied, embedded carbide added to the underside. It is used mostly for primary tillage in the fall or early spring.
This reversible chisel has heat applied, embedded carbide added to the underside. It is used mostly for primary tillage in the fall or early spring.
Fits: John Deere 2210 47° shank, Salford Curved Flat S-Tine two-piece shank
This holder allows the use of our 200 Series tips, providing a much longer wearing alternative to what is currently common in the industry. Shown with 200-TIP-0802.