NORTH AMERICAN MADE REPLACEABLE TIPS
Replaceable tips with tungsten carbide inserts are available for use with fertiliser knives, single shoot, paired row, and side band seed openers.
We partner with Leth Iron in Lethbridge, AB to cast our replaceable tips with high chrome material, providing Canadian-made products with superior wear resistance.
Quickly and easily install new tips with our stainless steel bolt and nut combos: 600-BNC-5000 and 200-BNC-3100. Proven to work when roll pins won’t.
SINGLE SHOOT REPLACEABLE TIPS
200-TIP-0511
CARBIDE TIP
1/2″ (13mm) with carbide insert on the nose. Not recommended in highly abrasive conditions.
200-TIP-0800
CHROME TIP
3/4” (19mm) tip. Not recommended in highly abrasive conditions.
200-TIP-0801
CARBIDE TIP
3/4” (19mm) tip with carbide insert on the nose.
200-TIP-0802
CARBIDE TIP
3/4” (19mm) tip with extra long carbide on the nose for highly abrasive conditions.
CARBIDE TIP
3/4” (19mm) tip with extra long carbide on the nose and sides for highly abrasive conditions. The same as 200-TIP-0802 but with the addition of the side carbide inserts.
VERTICAL CARBIDE TIP
3/4” (19mm) vertical tip with extra long carbide on the nose for highly abrasive conditions.
VERTICAL CARBIDE TIP
1” (25mm) vertical tip with double carbide insert. Recommended for rocky and highly abrasive conditions.
CARBIDE SPREAD TIP
2” (51mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.
CHROME SPREAD TIP
3” (76mm) tip. Not recommended in highly abrasive conditions.
CARBIDE SPREAD TIP
3” (76mm) tip with carbide insert on the nose and hard facing on the underside of the wings.
CARBIDE SPREAD TIP
3” (76mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.
CARBIDE SPREAD TIP
4” (101mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.
CARBIDE SPREAD TIP
3/4” (19mm) long-wearing single shoot tip with extra long carbide on the nose for high abrasive conditions. Used for seeding or fertilizing (not for double shooting).
PAIRED ROW REPLACEABLE TIPS
CARBIDE TIP
3-1/2” (89mm) cast chrome tip with carbide insert on the nose for excellent penetration and wear resistance. Carbide inserts on the underside of the wing maintain a sharp cutting edge.
Paired Row liquid option only tip. This double shoot tip has no vertical seed/fertiliser separation.
CARBIDE TIP
4” (102mm) cast chrome tip with carbide insert on the nose for excellent penetration and wear resistance. Carbide inserts on the underside of the wing to maintain a sharp cutting edge.
This Paired Row liquid or granular double shoot tip has no vertical seed/fertiliser separation.
Fits: Bourgault, C-Shank, Case IH, Horsch, Morris
CARBIDE TIP
3-1/2” (89mm) cast chrome tip with 3/4” (19mm) vertical separation of liquid, granular, or aqua NH3 fertiliser. Carbide insert on the nose for excellent penetration and wear resistance. Carbide inserts on the underside of the wing maintain a sharp cutting edge. Carbide inserts at the back of the underside of the wings seals up fertiliser trench prior to seed placement.
CARBIDE TIP
4” (102mm) cast tip with carbide insert on the nose for excellent penetration and wear resistance. Carbide inserts on the underside of the wing to maintain a sharp cutting edge. This Paired Row liquid or granular double shoot tip has no vertical seed/fertiliser separation.
CARBIDE TIP
4” (102mm) cast chrome tip with carbide insert on the nose for excellent penetration and wear resistance. These tips have 3/4”(19mm) vertical separation of granular, liquid, aqua NH3 or aqua NH3 + phos fertiliser. Carbide inserts on the underside of the wing maintain a sharp cutting edge. Carbide inserts at the back of the underside of the wings seals up fertiliser trench prior to seed placement.
610-TIP-4082 has additional carbide below the wings, along the sides of the fertiliser trench, to provide extra-wear life. Not recommended for use on Case IH 800/900 or NH P2070.
CARBIDE TIP
6” (152mm) cast tip with carbide insert on the nose for excellent penetration and wear resistance. These tips have 3/4” (19mm) vertical separation of liquid, granular, aqua NH3 or aqua NH3 + phos fertiliser.
Carbide inserts on the underside of the wing maintain a sharp cutting edge. Carbide inserts at the back of the underside of the wings seals up fertiliser trench prior to seed placement. Additional carbide is placed along the sides of the fertiliser trench, below the wings, to provide extra-wear life.
SIDE BAND REPLACEABLE TIPS
CHROME TIP
Cast chrome tip with carbide inserts on the nose and the wing for excellent penetration and wear resistance. The seed is placed in a 3/4” (19mm) band onto a firm, unfractured seedbed. Fertiliser is delivered in a band off to the side (right or left) on the same level as the seedbed.
612-TIP-0711 (left wing) & 612-TIP-0712 (right wing)
Fits: Bourgault, C-Shank, Case IH, Morris, Väderstad Seed Hawk
CARBIDE TIP
Cast chrome tip with carbide inserts on the nose and the wing for excellent penetration and wear resistance. A carbide wafer on the bottom of the fertiliser trough prevents bottom wear and keeps the fertiliser trench open. The seed is placed in a 1-1/2” (38mm) band 3/4” (19mm) above and to the side of the fertiliser row after the fertiliser trench has been sealed and seed bed has been firmed up.
614-TIP-2711 (left wing) & 614-TIP-2712 (right wing)
Fits: Bourgault, C-Shank, Case IH, Morris
FERTILISER REPLACEABLE TIPS
CHROME TIP
3” (76mm) chrome tip with extra long carbide on the nose to fracture the ground. Carbide pieces on the underside of the wings to maintain a sharp cutting edge.
Fits: 410, 599, 600, 602 & 607 Series knife holders.
CHROME TIP
3/4” (19mm) chrome tip.
Fits: 410, 599, 600, 602 & 607 Series knife holders.
CARBIDE TIP
3/4” (19mm) chrome tip with carbide on the nose.
Fits: 410, 599, 600, 602 & 607 Series knife holders.
CARBIDE TIP
3/4” (19mm) chrome tip with extra long carbide on the nose.
Fits: 410, 599, 600, 602 & 607 Series knife holders.
CARBIDE TIP & WING
3/4” (19mm) carbide tip and wing for liquid application. This allows vertical and horizontal separation when double-shooting with liquid.
Fits: 600-KNH-7562 holder only