070-RCH-0452ML
Bolt-on reversible chisel fits light and medium-duty field cultivators. Heat applied embedded carbide is added to the underside.
070-RCH-0451ML
Bolt-on reversible chisel fits light and medium-duty field cultivators. Heat applied embedded carbide added to the underside. Used for primary tillage.
410-PWV-0418ML
MAX LIFE™ quick change cultivator sweep with hardened wear pad. Heat applied, embedded carbide is applied to the underside.
410-SPK-0200ML
Heat applied, embedded carbide has been added to the underside of this quick-change spike. Ideal for primary tillage or banding fertiliser.
200-SPK-0200ML
MAX LIFE Spike with heat applied, embedded carbide added to the nose. Ideal for primary tillage or banding fertiliser.
200-PWV-0405ML
ThIs cultivator sweep is 1/4” (6mm) thick and 4” (100mm) wide. It has a hardened wear pad (52-56 HRC) which increases life expectancy.
Niaux 200 Disc Blades
Niaux 200 flat, wavy and concave disks have 20-40% longer wear than other disc blades on the market and a lifetime warranty on breakage.
070-RCH-0452
This bolt on reversible chisel fits 50° Shanks and is used for primary tillage in the fall and early spring.
070-RCH-0451
This reversible chisel fits light and medium-duty cultivators and is used for primary tillage in the fall or early spring.
070-RSP-0220A
Reversible spike is used for primary tillage in the fall and spring. Fits any chisel plow shank except Bourgault chisel plow and Morris LH 755 shank.
070-RSP-0210A
Flat through the bolt hole section, this bolt-on reversible spike fits the Bourgault chisel plow as well as the Morris LH 755 shank.
070-RSP-0200A
Bolt on reversible spike fits 47° and 50° shanks. Designed for light to medium-duty field cultivators or chisel plows where ground clearance in transport is a concern.
Bolt-On Sweeps
The extended stem bolt-on cultivator sweep fits heavy-duty chisel plows and field cultivators of many makes and models.
410-SPK-0200
This heavy-duty quick-change spike has a 3/8" x 2" hardened wear pad for extra life. Ideal for primary tillage or for banding fertiliser.
410-PWV-0518
Quick change cultivator sweep runs at a 3° pitch and is 5/16" thick by 5" wide. It has a 3/8" x 2" hardened wear pad for longer life.
410-PWV-0418
These quick change cultivator sweeps have a 3/8" x 2" hardened wear pad for a longer life. Ideal for primary tillage and banding fertiliser.
200-PWV-0928
This cultivator sweep is 5/16″ thick x 9″ wide. Hardened wear pad extends up the entire stem. Fits 200 Series Speed-Loc™.
200-PWV-0738
This cultivator sweep is 5/16″ thick by 7″ wide with a 4″ extended wear pad. Fits 200 Series Speed-Loc™.
200-PWV-0528
This cultivator sweep is 5/16″ (8mm) thick by 5″ (127mm) wide with a 3/8″ x 2″ hardened wear pad (52-56 HRC) which increases wear life.
200-PWV-0428
This cultivator sweep is 5/16" (8mm) thick by 4" (100mm) wide with a 3/8" x 2" hardened wear pad (52-56 HRC) which increases wear life.
200-PWV-0405
The increased pitch of this cultivator sweep improves penetration in hard or compacted ground and increases disturbance.
200-SPK-0230
This quick change spike has a hardened wear pad (52-56 HRC) for extra life. This tool is made specifically for slurry injection.
200-SPK-0215
Quick change spike has a hardened wear pad that extends to the top of the stem. Prevents wear in abrasive soil and at greater working depths.
200-SPK-0200
Quick change spike is 5/8" thick by 2-1/4" wide by 6" long. Hardened wear pad for extra life. Fits 200 Series Speed-Loc™
200-GFO-0308
This “Goosefoot” tillage tool is 5/16” (8mm) thick by 2-1/2” (63mm) wide. Designed specifically for vibrating S-tine cultivators.
410 Series Sweeps
Our sweeps boast long-lasting designs, precise heat treatments, consistent quality, and innovative Speed-Loc™ technology.
200 Series Sweeps
Our cultivator sweeps boast long-lasting designs, precise heat treatments, consistent quality, and innovative Speed-Loc™ technology.